9
Food Sealer: Instructions
Operation Instructions
1.
Plug the unit in and then switch it on.
2.
Unroll the bag and put one end of the bag on top of the lower black
rubber strip. Ensure the bag does not cover the vacuum nozzle.
Then close the cover (see figure 1).
3.
Press the cover down ensuring that the locking mechanism locks into
place (see figure 2).
4.
Press the
“Seal Only”
button.
5.
Once the sealing light turns off the seal is complete and the unit can
be opened.
.
Cut the roll to your desired bag length.
7.
Fill the bag with desired contents.
8.
Clean and straighten the open end of the bag, make sure there are no
wrinkles or ripples on the panels of the open ends.
FIGURE 1
FIGURE 2
FS_INS.indd 9
3/11/06 13:59:37
