background image

Connect green/yellow

lead to ‘E’ or - Earth

Connect 

blue lead 

to ‘N’ -

Neutral

Connect 

brown lead 

to ‘L’ - Live

N

L

E

9

Technical Specifications

Cord length

2.44m

Steam output

24.5g/min

Tank size

380ml

Power consumption

2200W

Power supply

220-240V  ~ 50Hz

Model

LB-113

Fuse & mains plug replacement 
(UK & Ireland only)

This appliance is fitted with a BS 1363 13-amp 
plug. If you have to replace the fuse, only use 
those that are AS TA or BSI approved to BS 
1362 and have a rated current of 13 amps. 
Should you need to replace the plug; the 
wires in the power cord are coloured in the 
following way: 
Blue – Neutral 
Brown – Live 
Green & Yellow – Earth
As the colours of the wires in the power 
cord may not correspond with the coloured 
markings identifying the terminals in your 
plug, proceed as follows:  

The wire that is coloured green & yellow 
must be connected to the terminal in the 
plug that is marked with the letter E or by the 
earth symbol 

.

Disposal and the environment

This product is covered by the waste electrical and electronic equipment 
(WEEE) regulations. It should not be discarded with normal household waste,  
but taken to your local collection centre for recycling. For further information, 
please contact your local authority or approved disposal agency.

Technical Information 

The wire that is coloured blue must be 
connected to the terminal that is marked 
with the letter N.

The wire that is coloured brown must be 
connected to the terminal that is marked 
with the letter L.

If the power lead is damaged, it must be 
replaced by a qualified electrician.

PG_IM_A.indd   11

23/06/2014   15:22

Summary of Contents for Pheonix Gold













Reviews: