User interface:
Charging voltage
Selection button
Start button
Fault
Adjustable charging mode:
6 V
Charging of 6 V batteries from 2 Ah to 32 Ah
Charge retention of 6 V batteries from 2 Ah to 50 Ah
12 V
Charging of 12 V batteries from 2 Ah to 32 Ah
Charge retention of 12 V batteries from 2 Ah to 50 Ah
Charge level:
• Charging LED flashes: Battery test
• Charging LED illuminated: Charging
• Full LED illuminated: Fully charged
(trickle charging of battery commences)
Power
Charger use:
Connection
1.
Connect the charger power supply unit to the socket.
2.
First connect the red terminal to the positive terminal on the battery.
3.
Then connect the black terminal to either the negative terminal on the battery or the earth terminal on
the vehicle body.
4.
Select the desired charging mode based on the battery using the selection button. Then acknow-
ledge with the start button.
It is recommended that the optional eyelets be used for sustained connection to the charger (e.g. for
battery trickle charging).
Disconnection
1.
Following use of the charger, disconnect the link to the mains socket.
2.
Then disconnect the black terminal from the negative/earth terminal.
3.
Disconnect the red terminal from the positive terminal on the battery.
