background image

Skan 25.0
Battery charger 

JM no. 609 03 30

EN

 Battery charger

ES

 Cargador de baterías

IT

 Caricatore batteria

PL

 

Ładowarka do akumulatorów

DA

 Batterioplader

CS

 

Nabíječka baterií

SK

 Nabíjačka batérií 

NL

 Acculader

FR

 Chargeur de batterie

Thank you for choosing a JMP Skan battery charger. The JMP Skan 25.0 battery charger is suitable for daily use for rapid charging 
of a battery and as a power supply during diagnostic work and flashing.

Technical data:

12-24 V / 5-25 A, for batteries from 5 Ah to 800 Ah
Dimensions: 280 x 270 x 80 mm, weight: 2.14 kg, mains power cable: 1.90 m, connection cable: 2.10 m

Suitable for:

•  Standard lead acid
•  Gel
•  AGM
•  EFB
•  Lithium

Safety information:

•  Read the instructions for use through carefully before using the charger.
•  The charger is intended for charging lead acid, gel, AGM, EFB and lithium (LiFePO4) batteries. It must not be used for any other 

purposes. Disposable batteries must not be charged. Do not charge any frozen batteries.

•  Battery acid is corrosive. In case of accidental contact between the acid and the skin or eyes, rinse immediately under running 

water and consult a doctor.

•  When connecting and disconnecting the battery, wear safety glasses and keep the battery away from your face at all times.
•  Keep out of reach of children. This device is not a toy and must not be used as such.
•  This device should not be operated by people (including children) with limited physical, sensory or mental capabilities, nor by 

people without sufficient relevant knowledge and experience if such people are not being supervised and have not received 
comprehensive instruction.

•  Potentially explosive gases may develop during the charging procedure. As such, sparks and naked flames must be avoided. 

No smoking.

•  Perform the charging procedure in a well ventilated and dry environment.
•  Never place the battery charger on top of the battery during the charging procedure.
•  Repairs and maintenance work on the device and mains power cable may only be performed by skilled professionals.
•  Improper use of and interference with the device will void all warranty claims.

Scope of supply: :

JMP Skan 25.0 with adapter cable and terminals

Summary of Contents for Skan 25.0

Page 1: ...d is corrosive In case of accidental contact between the acid and the skin or eyes rinse immediately under running water and consult a doctor When connecting and disconnecting the battery wear safety glasses and keep the battery away from your face at all times Keep out of reach of children This device is not a toy and must not be used as such This device should not be operated by people including...

Page 2: ... of 12 V batteries 5 Ah to 100 Ah Trickle charging of 12 V batteries 5 Ah to 150 Ah Suitable for the charging of lithium batteries LiFePO4 no other types of lithium batteries 12 5 A Charging of 12 V batteries 70 Ah to 250 Ah Trickle charging of 12 V batteries 70 Ah to 360 Ah Suitable for the charging of lithium batteries LiFePO4 no other types of lithium batteries 25 A Charging of 12 V batteries 1...

Page 3: ...e car showroom without draining the battery Only in 12 V mode SUPPLY Power supply function 14 0 V To activate this function press and hold the Mode button for 5 seconds This function is used to maintain the power supply to a vehicle s memory modules when changing the battery or in all cases where the battery is disconnected from the vehicle s electrical circuit Only in 12 V mode CAUTION IN THIS FU...

Page 4: ... Charging with constant current until maximum battery voltage is achieved 5 Fourth charging step Absorption Charge charge with constant voltage Charging with stabilised current until current reaches minimum values 6 Fifth charging step Optimise for Recon charging mode only Intensive charging phase with constant current and increa sing voltage to boost the battery s charging performance 7 Second di...

Reviews: