background image

22

HOW TO OBTAIN WARRANTY SERVICE

If any component of the Fountain proves to be defective during the warranty period 
applicable to such component, contact our Customer Service Department to make 
arrangements for warranty service and for the location of the nearest certified JM Posner 
repair service provider. Please be prepared to provide (1) your name, address, and 
telephone number (2) Proof of Purchase (3) a description of the defect believed by you 
to be covered by this Limited Warranty (4) JM Posner Fountain model and serial number. 
To reach a Customer Service Centre, please call:

0044 (0) 1923 220805 (UK) or E-mail info@jmposner.co.uk.

After you have contacted our offices and discussed the nature of the claimed warranty 
defect JM Posner may require you to return the Fountain to a specified authorized service 
centre for inspection and Warranty Service, or may authorize you in writing to obtain 
service from an authorized technician in your area. JM Posner or its designated service 
centre, in its sole discretion, will determine after inspection, if the defect developed under 
normal and proper use and the availability of coverage under this warranty. Provided 
the defective component(s) are catered we reserve the right to use reconditioned or 
refurbished serviceable used parts which meet JM Posner’s’ quality standards for warranty 
repair, replacement, or adjustment of the defective components shall be JM Posner’s sole 
obligation and the customer’s sole remedy hereunder. The Warranty Service provided 
will restore the Fountain to normal operating condition and JM Posner has no liability to 
update any Fountain presented for Warranty Service with any internal or external design 
or modification which JM Posner had made to its Fountains after the date you purchased 
the Fountain covered by this warranty. You are responsible and shall pay for all shipping 
costs required to obtain Warranty Service. You are responsible for ensuring that the 
Fountain is packaged and shipped in such a way that it arrives to JM Posner or the service 
centre undamaged. You are responsible for any damage incurred in shipping. We strongly 
recommend packing your Fountain in your original box with packing material.

This warranty is complete and exclusive statement of warranty which JM Posner 
Ltd agrees to provide with respect to the Fountain and it shall supersede all prior 
and contemporaneous oral or written agreements, understandings, proposals and 
communications pertaining to the subject matter hereof. Representations and warranties 
made by any person, including dealers or distributors, which are inconsistent or in conflict 
with the terms of this warranty, shall not be binding upon JM Posner unless in writing and 
approved by an expressly authorized officer of JM Posner.

Summary of Contents for SQ1
























Reviews: