(1) If the lock batteries are low or input error, it will flash RED LIGHT.
(2) Password should be 3-12 digits, the first digit can’t be “0”. If the password is 12 digits, you don’t need to
input “ ” to end.
(3) If the password group is max or the password group is zero, you can’t add or delete password group, it will
flash
RED LIGHT.
(4) When you delete single MASTER USER PASSWORD, the MASTER USER PASSWORD which uses to verify
can’t be deleted, it will flash
RED LIGHT.
(5) If you delete all MASTER USER PASSWORD, the MASTER USER PASSWORD will restore 11111111.
(6) When you ADD or DELETE USER PASSWORD, only can input “1” “2” “3” “4” option button.
Input “20 ” ⇢ Inserir
“MASTER USER PASSWORD ” ⇢ BLUE LIGHT FLASHES ⇢ Input ”4” ⇢ GREEN
LIGHT FLASHES TWICE
EN
EN
6 - DELETE ALL NORMAL USER PASSWORD
7 - UNLOCK
8 - WARM PROMPT
STEP 1
Press 2 seconds to wake up the system.
STEP 2
Put the password after
JNF IS BLUE.
Note:
(1) After 6 times error try, the keypad will be locked for 3 minutes.
[When you touch the keypad, the
RED LIGHT will flash twice]
(2) If you want to set ALWAYS OPEN, after unlocking the lock by password
[
GREEN LIGHT is always on] and keep pressing the “0” button until the
GREEN LIGHT flashes. The GREEN LIGHT will flash 6 times, it means
ALWAYS OPEN setting is successful.
(3) After using the MASTER USER PASSWORD or NORMAL USER PASSWORD
to unlock the lock, the TEMPORARY USER PASSWORD will be deleted. If
you want to set the
TEMPORARY USER PASSWORD again, please follow
step 4 “
ADD TEMPORARY USER PASSWORD” to set.
INDICATIONS
MAINTENANCE
For a perfect operation of the control access we recommend that:
- The physical installation of the door lock is made by a professional.
- The mortice lock mechanism is in good working condition.
- Do not be disassembled any component, excluding the battery access
- The batteries must be the type described in the technical characteristics of the same.
- For indoor use only.
To keep the stainless steel and plastic exterior parts of the access control system you can use a product like
Inox Repair (JNF) or Spray Inox (JNF), both applied with a soft and dry cloth.
Should be made a periodic inspection checking some signs of wear that compromises the normal operation.
The screws that secure the handles must be tightened periodically.
Manual de instalação /
Installation Manual / Manual de instalación
18/30
www.jnf.pt
Manual de instalação /
Installation Manual / Manual de instalación
19/30
www.jnf.pt
2 seconds
- MI242-3
- MI242-3
