SAFETY WARNINGS & INSTRUCTIONS
SYMBOL AFFIXED TO THE MACHINE
DO NOT OVERREACH
Keep proper footing and balance at all times when loading
or unloading the mixer.
Never stand on mixer. Serious injury could occur if the mixer
is tipped or if the moving parts are unintentionally contacted.
Do not store anything above or near the mixer where anyone
might stand on the mixer to reach them.
AVOID INJURY FROM UNEXPECTED ACCIDENT
Keep hands out of the way of all moving parts. Do not place
any part of your body or any tool, like shovel in the drum
during operation. When operating, do not pass hands through
the clearance between frame and support arm or the one
between the drum and support arm.
DO NOT FORCE TOOL
It will do a better and safer job at its design rate. Always work
within the rated capacity.
Do not start the motor if the drum is fully loaded. Do not turn
mixer off while full of concrete.
Do not use the mixer for a purpose for which it
was not intended.
The mixer is not to be towed by any vehicle.
NEVER LEAVE MIXER RUNNING UNATTENDED
Do not leave mixer until it has come to a complete stop.
DISCONNECT POWER
Never open the motor cover before unplugging the mixer.
Disconnect from power supply when not in use, before moving,
making adjustments, changing parts, cleaning, or working on
the mixer. Consult technical manual before servicing.
MAINTAIN YOUR MIXER WITH CARE
Clean the mixer immediately after use. Keep the mixer clean
for best and safest performance.
When maintaining this mixer, only the manufacturer’s original
replacement parts may be used.
PROTECT THE ENVIRONMENT
Take left over materials to an authorized collection point or
follow the stipulations in the country where the mixer is used.
Do not discharge into drains, soil or water.
STORE IDLE EQUIPMENT
When not in use, the mixer should be stored in a dry location
to inhibit rust. Keep the mixer away from children and others
not qualified to use it.
4
Summary of Contents for HCM550
Page 11: ...PARTS SCHEMATIC 11 ...
