background image

3

children and do not allow persons unfamiliar 
with the power tool or these instructions 
to operate the power tool. 

Power tools are 

dangerous in the hands of untrained users. 

e)  Maintain power tools. Check for misalignment 

or binding of moving parts, breakage of parts 
and any other condition that may affect the 
power tool’s operation. 

If damaged, have the 

power tool repaired before use. Many accidents 
are caused by poorly maintained power tools. 

f)  Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting 
edges are less likely to bind and are easier to 
control. 

g)  Use the power tool, accessories and tool bits 

etc. in accordance with these instructions, 
taking into account the working conditions and 
the work to be performed. 

Use of the power 

tool for operations different from those intended 
could result in a hazardous situation. 

5) Service
a)  Have your power tool serviced by a qualified 

repair person using only identical replacement 
parts. 

This will ensure that the safety of the 

power tool is maintained.

ADDITIONAL SAFETY POINTS 

FOR YOUR HAMMER

1.  Wear ear protectors. 

Exposure to noise can 

cause hearing loss.

2.  Use auxiliary handle(s), if supplied with the tool. 

Loss of control can cause personal injury.

3.  Hold power tool by insulated gripping surfaces, 

when performing an operation where the 
cutting accessory may contact hidden wiring 
or its own cord. 

Cutting accessory contacting a 

“live” wire may make exposed metal parts of the 
power tool “live” and could give the operator an 
electric shock. 

4.  Recommendation that the tool always be 

supplied via a residual current device with a 
rated residual current of 30 mA or less.

SYMBOLS

To reduce the risk of injury, user must 
read instruction manual

Warning 

Wear ear protection

Wear eye protection

Wear dust mask

Double insulation

RCM marking

ABN: 

Australian Business Number. 

By this number, business information 
such as entity type, status, business 
location etc. can be found at website 
http://abr.business.gov.au. 
ABN of Positec Australia Pty Limited 
is 14 101 682 357

Summary of Contents for JM1000RHD













Reviews: