www.jobo.com
28
Note:
a. Use wireless remote control to control JIB 4 can check whether the code pairing is successful. The control
functions include: Video recording starting/stopping, photo shooting, waking in standby mode, and laser light
turning on/off. JIB 4 will tick once for each operation. In case of video recording stopping or laser light turning
off, JIB 4 will tick twice.
b. Remote control range: Remote control within 10 meters in any angle horizontally without barriers.
c. To press „Record” , „Shutter” or „Stop“ key on the remote control in standby mode can wake up the system.
9. Standby mode:
Turn the power switch to „ON” , the system will start working and it will enter preview state after finishing
initialization. In case of no any mission and operation, the system will auto enter standby power-saving mode at the
end of the auto standby time set. Press „Record” or „Shutter” key at this time, or remote control any key on the
remote control, the system will be waked up.
Note:
a: To press keys on TFT screen in standby mode cannot wake up the system.
b: The LCD segment screen does not display anything in standby mode.
10. AV output connection:
In preview state, connect JIB 4 with the display device with AV cable, and then all functions of JIB 4 can be operated.
Note:
After connecting with audio and video display device, TFT screen on JIB 4 and the voice will be turned off, and the
audio and video will be displayed on the display device. LCD segment screen on JIB 4 will display the
corresponding function operations normally.
11. HDMI output connection:
