www.jobo.com
29
In preview state, connect JIB 4 with the high-definition display device with HDMI cable, and then functions of
JIB 4 can be operated.
Note:
a. After connecting with HDMI display device, TFT screen on JIB 4 and the voice will be turned off, and the audio
and video will be displayed on the display device.
b. JIB 4 may be in abnormal state if the HDMI cable is inserted or unplugged improperly when connecting. It can
be recovered after re-starting and LCD segment screen will display the corresponding function operations normally.
12. USB connection:
a. When there is no preset battery in JIB 4, use USB power adapter to connect with JIB 4, all functions can be operated (meanwhile,
LCD segment screen and TFT display screen will display the corresponding operation prompts).
b. In start-up state, use USB cable to connect with the computer, data stored in JIB 4 memory and the Micro SD card can be read
(at this time, LCD segment screen will display the USB connection state icon).
c. JIB 4 may be in abnormal state if the USB cable is inserted or unplugged improperly when connecting, and restart to recover.
13. Prompt of key tone
a. Press „Record” or „Shutter” key once in normal using, JIB 4 will tick once to indicate the effective operation.
b. When stopping video recording, JIB 4 will tick twice.
c. JIB 4 will tick twice to indicate the successful code pairing.
d. Press „Shutter” key in video recording, JIB 4 will not give prompt.
e. When operating on TFT display screen, press „Menu“ key in preview state, press „>„ or „<„ key to enter the menu
