6
Additional Hazards
●
Slip/Trip/Fall is a major cause of serious injury or death. Beware of
uneven or slippery work surfaces.
●
Exercise care when working in the vicinity of unprotected holes or
excavations.
3. UNPACKING AND CHECKING
●
Carefully remove the product from the packaging and examine it for any
sign of damage that may have happened during shipping. If any part is
damaged or missing, please contact the seller and do not attempt to use
the product.
●
Accessories
Trolley wheel - for easy transportation.
Extension Plate
Handle
4. FUNCTIONS AND CONTROLS
The motor is controlled by an ON/OFF switch or push button is mounted on
the motor below the fuel tank. Tension of the drive belt is adjustable, loosen
the four nuts on the bolts which secure the motor to the base plate. Adjust the
set screws which bear against the motor crankcase to achieve the required
belt tension. Ensure that the four nuts and the set screw lock nuts are
tightened after adjustment.
5. OPERATION
Pre-start-up inspection
The following
Pre-start-up
inspection must be performed before the start of
each work session or after every four hours of use, whichever is first. If any
fault is discovered, the compactor must not be used until the fault is rectified.
Thoroughly inspect the compactor for signs of damage.
1. Check components are present and secure. Pay special attention to the
belt drive safety guard fitted between the engine and the vibrator unit.