background image

3

General safety instructions

1. The machine is designed for digging small to mid-sized gardens and
flowerbeds.Be sure to observe the restrictions in the additional safety
instructions.
2. The equipment is allowed to be used only for its prescribed purpose.
3. This implement can cause serious injuries if it is not properly used.Please
read these Operating Instructions carefully and familiarize yourself with all the
control elements before operating this implement. Keep these Operating
Instructions in a readily accessible place so that this information is always at your
disposal.

Operating the implement:
WARNING!

The implement can cause serious injuries. How to avoid accidents

and injuries:

Preparations:

· Never allow children and people who are not familiar with these Operating
Instructions to use the implement.Local regulations may stipulate a mini-mum
age for operators.
. This appliance is not intended for use by persons(including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge,unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
. Never start up the implement while other people,but especially children and
domestic pets, are in the vicinity.
. Check the area on which the implement is to be used.Remove all stones, sticks,
wire and other foreign bodies that could be caught up and flung out.
. Always wear appropriate protective work clothes and firm shoes with nonslip
soles, strong long trousers, ear defenders and goggles. Never operate the
implement while bare footed or when wearing open sandals.
. Never operate the implement if it is damaged, incomplete or has been modified
without the consent of the manufacturer. Never work with damaged or missing
protective devices (e.g. starting lever, unlocking knob, impact protector).
. Never disengage protective devices (e.g. by tying the starting lever).
.Children must be supervised in order to ensure that they do not play with the

Summary of Contents for CT5592

























Reviews: