The surface Cleaning System you have purchased connects directly to a 1/4”
quick connect coupler, operating to a maximum of 4000 PSI.
This 14” rotary surface cleaner is designed to operate with cold water pressure
washers. We do not recommend the use of hot water as the nylon brush skirt will
soften and wear prematurely.
Before operation ensure that the pressure washer is on low pressure when first
using the machine. Adjust pressure with adjustable unloader.
Intended Use
The rotary surface cleaner is suitable for cleaning floors and walls in conjunction
with a high pressure cleaner.
(A) Recommend Operating pressure: 2000-3600 PSI
(B) Maximum pressure: 4000 PSI
(C) Maximum water temperature: 85°C/180°F
• Never exceed maximum operating pressure and temperature.
Care
•Protect from frost/ freezing.
•Ensure bristles are not deformed during storage.
OPERATING
Never reach under the unit while the high-pressure cleaner is operating.
• Never direct the 14” rotary surface cleaner at humans or animals.
• Do not operate on a ladder.
WARNING! Nozzle has been set according to factory set alignment.
During operation, should you experience a buildup of small stones or other
foreign material within the cover, we recommend that you simply tip the cleaner
on its side at 45° which should expel any foreign materials. This will extend the
life of your tips and rotary arm. The tips that have been installed on your surface
cleaning system permit the use of your cleaner with a pressure washer producing
