background image

3901726 

 JobSmart 4 Gallon Air Compressor Assembly & Operating Instructions 

6

 
 
SERVICE 

 

Tool service must be performed only by qualified repair personnel. 

Service or maintenance by unqualified 

personnel could result in a risk of injury.

 

 

When servicing a tool, use only identical replacement parts and follow instructions in the manual. 

Use 

of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury. 

 

 
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. 

This manual contains important information regarding safety, operation, maintenance and storage of this product. 
Before use, read carefully and understand all warnings, cautions, instructions and labels. Failure to do so could result 
in serious personal injury, property damage or even death. 

 

 
 

IMPORTANT SAFETY INSTRUCTIONS 

 

                                                                                           

 

Before using this tool, you need to become familiar with its operation.

 If you are unsure about the 

operation of the tool, or have any questions about its proper use, call the Customer Service Department at  
1-888-287-6981. Follow these instructions for safe handling of the tool: 

• 

Be sure your work area is clean and secure. 

Be sure the area is free from all foreign material, nails, 

staples, or any other material

• 

Always use the appropriate safety gear when operating. 

Including but not limited to, goggles, dust 

mask or respirator. 

 

 

 

PACKAGE CONTENTS 

• Air Compressor 
• Air Filter 
• Air Chuck 
• Oil Breather Cap 

 

 
 

 

COMPONENTS 

 
 

  
 

 

 

 
 

 

 

 
 

 

 

 

1. Air Filter 
2. Handle 
3. Air Regulator 
4. Air Chuck 
5. Pressure Gauges 
6. Tank Drain Valve 
(Under Compressor) 
7. Air Tank 
8. Safety Valve 
9. Power Switch 
10. Oil Breather Cap

 

10 

Summary of Contents for 3901726













Reviews: