2
2.
INSTALLTION
2.1
Location
When selec
�
ng a posi
�
on for your unit you should make sure the floor is flat and
fi
rm, and the
room is well ven
�
lated. Avoid loca
�
ng your unit near a heat source, e.g. cooker, boiler or radiator.
Also avoid direct sunlight as it may increase the electrical consump
�
on. Extreme cold ambient
temperatures may also cause the unit not to perform properly. This unit is not designed for use in
a garage or outdoor installa
�
on. Do not drape the unit with any covering.
When installing the unit, ensure that 10 cm of free space is le
�
at both sides, 10 cm at the rear
and 30 cm at the top of the unit. This will allow cold air to circulate around the wine cooler and
improve the ef
fi
ciency of the cooling process.
2.2
Reversing the Door Swing
1)
Take off knuckle guard.
2)
Take off top hinge.
3)
Take off the door of refrigerating chamber
4)
Take off middle hinge with a screw driver
