5. Then fix adjusting holder to hanger unit by 16pcs M4*10, connecting plug and extending air pipe.
6. Pull out second chimney and fix it to hanger unit
INSTALL FILTERS
1. To remove the grease filter, push in on the metal latch tab. This will disengage the filter from the hood.
Tilt the filter downward and remove.
2. To install the grease filter, align rear filter tabs with slots in the hood. Push in the metal latch tab, push
filter into position and release. Make sure the filter is securely engaged after assembly.
3
.
To install the charcoal filter (optional), and lock it until the stop click is heard.
-28-