26
HEMMING (Optional)
1. Raise the foot and the needle to its
highest position. Replace the foot with
the picot foot.
2. Fold over the fabric edge by about 3 mm
and place it under the foot. Secure the
folded edge with a few stitches. Slide
the hem of your project into the picot
foot by pulling the threads.
3. Lower the foot and sew the hem.
4. While sewing fold the fabric to the left a
little and guide it into the hemmer foot.
5. Make sure that the fabric does not move
under the right half of the foot. The
fabric must be fed into the scroll of the
hemmer sufficiently so that the project
edge runs freely through the groove
under the foot.
Only suitable materials can be used and
some practice may be necessary to
achieve the best results.
QUILTER (Optional)
1. Slide the arm through the hole on top
of the presser foot holder.
2. Move the quilter to the required stitch
distance.
3. Sew one line to test the machine
stitches, then adjust the quilter
position you wish to use.
3 mm
1 mm
20 mm