Oxford
®
UniFit Deluxe Sling
English
3
2
3
1
4
Make sure the positioning straps and sling identi-
fication label are on the outside of the sling. Feed
the sling down the back of the patient, leaving the
aperture at the base of the spine. Check the sling
is square across the shoulders.
Whilst ensuring that the leg section is not twisted,
carefully feed it under and up between the pa-
tient’s legs. Repeat this procedure for the other
leg. Cross strap A through strap B.
Pass strap C up through strap B then repeat for
the other leg using strap D through strap A. Check
the sling is smooth under the patient and the posi-
tion is comfortable. An integrated modesty loop
on the leg section is also available for increased
patient dignity.
Move the hoist into position and attach the leg
straps to the front hooks on the spreader. Next
attach the shoulder straps to maintain an upright
seated position. The lift may move towards the
patient as you do this. When reseating the client,
use the sling positioning handles to help achieve
a safe and comfortable position
NOTE:
Sling positioning handles are designed
for turning a patient only and must not be used
for lifting..
Fitting the Sling from a Seated Position
