11
Joerns® Assist Device and Side Rails
Vari-Care Models
© 2014 Joerns Healthcare • 6110015 RevJ • 14-2315
Model F14SC
For Joerns
®
Bed Models Easy Care
®
3, 5, 7, 9, Care
100, and EasyCare
1. Remove plugs from holes as shown in Figure 19 for
80" bed and Figure 20 for 76" bed.
2. Insert the side rail in holes A, B, C, and D for 80"
bed (Figure 21) and in holes E, F, G, and H for 76"
bed (Figure 22).
3. Attach mounting clips from the bed to the side rail.
Figure 20
Figure 21
Figure 22
A
B
C
D
E
F
G
H
Figure 19
Maintenance/Inspection Information:
Visually
inspect the assist handle and mounting bracket,
and check for loose hardware on a monthly basis.
Tighten loose hardware as stated in the installation
instructions.
Warning:
In the event worn or broken part(s) are
identified, remove the device from service until repairs
are made.
Note:
Assist devices are made for right or left side of
bed as viewed from the foot of the bed. The latch on
both assist devices must face toward the center of the
bed, so they operate properly.
