8
Joerns® Assist Device and Side Rails
Vari-Care Models
© 2014 Joerns Healthcare • 6110015 RevJ • 14-2315
3.
Once the proper cross member has been located,
locate the proper alignment labels for the model
of bed you have. See Figure 2 (page 7) or Figure
3 for clarification. Apply the label according to the
illustrations. When complete, there should be an
alignment label on each side of the frame, aligned
with the cross member located closest to the head
panel.
4. Figure 4 shows a general assembly instruction.
Be sure to follow the assembly sequence as
illustrated. The bolts must be inserted from the
inside of the frame out, and the nuts must be
fastened to the outside plate as shown.
Important Note:
When attaching brackets, ensure that
wires are not caught between the brackets and the
frame.
Figure 3
Figure 4
