MNP37M03GBV00 Date: 24-11 Rev. 0
Page 10 of 79
The machine should not be installed out of doors and should be in a dry
environment with temperatures never below 0 °C with a maximum temperature of 32 °C
and humidity under 70%. Do not install in excessively humid locations or in places
where a water jet is used for washing (such as large kitchens).
WARNING:
in view of the sensitivity to humidity and temperature of some products
the abovementioned conditions need to be met.
.
F
IMPORTANT :
It is important for the machine to be level, as it should operate
in a vertical position, both laterally and back to front, with a maximum inclination of 2 °
(5%).
4.2. - Start up.
Once you have installed the machine in place, cover the front bottom part of the
machine (where you inserted the forklift truck’s fork) using a piece which is located
inside the machine. Open the door and anchor the cover on the three screws located on
the legs.
Insert the product and price labels. To do this, open the pushbutton panel, removing
the butterfly screws. The machine should look as shown on fig. 4.01
figure 4.01
1.
Product label slot
2.
Space for the price label
3.
Custom LCD display control card. Contrast is controlled by means of a variable
resistance
4.
Programming button
2
1
3
4
