vision
Snack Plus/Easy Combo
//
Vending
MNP86V03GBV00
Date: 2010/06/14 Rev. 0
PAGE 15 OF 62
Fig. 21
4. Electric-electronic specifications
The cooling unit, fluorescent lamps, turbine and transformer are supplied with mains
voltage (220 VAC). They should therefore not be handled without disconnecting the
machine from mains.
Power supply voltage
220 ± 10% VAC.
vision
Maximum power
Maximum intensity
Snack Plus
100 W
0,4 A
Easy Combo
830 W
3,5 A
4.1. Initial electrical installation
Prepare a 220-240 VAC, 50 Hz / 10A socket, protected with an automatic connection
system. The socket should match the machine plug (European, with ground connection).
Follow all Low Voltage Installation Regulations and check that ground connection works
properly once the machine has been installed.
4.2. Product dispenser channel
There are three types of different product dispensers. Depending on the type of product
to be served, you can interchange these channels, offering a wide range of
combinations. A maximum of 10 dispenser channels can be added to each tray.
Fig. 22
Fig. 23
Fig. 24
Ref. code
8210061
(Fig. 22)
8210062
(Fig. 23)
8210063
(Fig. 24)
Motor power supply
12 Vdc
12 Vdc
12 Vdc
Max. power
consumption
3 W
3 W
3 W
To properly dispense a product, the dispenser motor operation voltage has to be
programmed (
address
25
) to ensure the most appropriate dispensing speed for each
product.
