vision
Snack Plus/Easy Combo
//
Vending
MNP86V03GBV00
Date: 2010/06/14 Rev. 0
PAGE 25 OF 62
5.4. Restocking machine trays
Open the machine door, press the tray anchoring system (on the side), slide out the tray
to be restocked and place the products in their channel until all of the machine’s trays
have been restocked.
Fig. 36
5.5. Product selection
To select the desired product enter the two-digit number associated to that product,
found under each channel in the front of each tray (see fig. 37).
Fig. 37
You can program in (
address
09
) all the product selection numbers and the channels
associated to these selection numbers. Detection of existing channels occurs when the
machine is turned on and when you exit programming mode, so if you change any
connector tray you need to turn the machine off and on again or exit programming
options. If the channel is not present in the machine, we cannot select it to do any kind of
vending or programming operation with it.
If coins have not been inserted and you select a product, the price will appear on the
display. If the price is set to zero, the program will not do any operation with this product.
When you select this product, the display will automatically show the time again and not
show the price. If you have inserted money, when you select a product, the price blinks
on the display while the sale takes place, but if the price is set to zero, no sale will take
place and the credit for the money inserted will be shown.
