Easy Menu
Easy Menu - 1 -
the
JOHANNUS
revolution
The Easy Menu is an operating system the settings of which can be read on the display.
The Easy Menu is operated with the - and + buttons and the SET and the MENU buttons.
The Easy Menu consists of the following modes:
Crescendo
Datadump
Demo Songs
Keyboard Config
Key Volumes
MIDI Config
Orchestrals
Reset Procedures
Reverb Settings
Startup Settings
Temperaments
Tuning
Zimbelstern Settings
The menu has a scrollbar on the right. It indicates where you are in the menu. If you can go
further down in the menu, there is a down arrow in the bottom of the scrollbar. If you can go
further up in the menu, there is an up arrow in the top of the scrollbar.
Crescendo
1.
Press the MENU piston.
2.
Use the - and + pistons to select the
Crescendo
mode on the display and press SET.
3.
Use the - and + pistons to select the step to be changed.
4.
Change the registration by switching a register on or off.
5.
Press SET to save the registration.
6.
Press the MENU piston to exit the Crescendo menu.
7.
Press the MENU piston again to exit the Easy Menu
Datadump
The Datadump Mode sends settings from the organ to a storage medium (for example a
sequencer) through the MIDI SEQ. output. See §3.4.
1.
Press the MENU piston.
2.
Use the - and + pistons to select the
Datadump
on the display.
3.
Press the SET piston. The following text appears in the display:
Press SET to send
data
.
4.
Make sure the desired storage medium is properly connected.
5.
Press the SET piston again. When data is being sent,
Sending data
appears on the
display.
As long as
Sending data
appears in the display, you cannot use the organ.
6.
Press the MENU piston to exit the Easy Menu.
