Easy Menu
Easy Menu - 4 -
the
JOHANNUS
revolution
Reset
ALL
stops:
The Reset ALL stops mode resets the key volumes of all stops in one intonation to the factory
setting.
1.
Select an intonation.
2.
Press the MENU piston.
3.
Use the - and + pistons to select the
Key Volumes
function on the display.
4.
Press the SET piston.
5.
Use the - and + pistons to select the Reset ALL stops function on the display.
6.
Press the SET piston.
7.
The display shows a prompt for confirmation.
Use the - and + pistons to select
No
or
Yes
.
8.
Press the SET piston.
9.
Press the MENU piston twice to exit the Easy Menu.
MIDI
Config
MIDI is a protocol for communication between the organ and other devices, such as:
PC
Sequencer
Other musical instruments
Programming
MIDI
Config
The programmable MIDI stops allow you to control any module voice through any MIDI channel
(1-16).
1.
Press the MENU piston.
2.
Use the - and + pistons to select the
MIDI Config
mode on the display.
3.
Press the SET piston. The display shows the text
Manual:
and the text
Channel MSB
LSB Voice
below this.
4.
Select the MIDI stop to be programmed (for example
MIDI III
). The display will now
show following
Manual:
the selected keyboard and the selected settings below the text
Channel
MSB LSB Voice
. The arrow preceding the number indicates the setting that
can be changed.
5.
Use the - and + pistons to select the desired MIDI channel (
Channel
).
6.
Press the SET piston. The arrow now goes to the next setting:
MSB
.
7.
If necessary, use the - and + pistons to select the required MIDI channel (
Channel
).
8.
Press the SET piston. The arrow now goes to the next setting:
LSB
.
9.
If necessary, use the - and + pistons to select the required LSB value (
LSB
).
10.
Press the SET piston. The arrow now goes to the next setting:
Voice
11.
Use the - and + pistons to select the desired module voice Voice value (
Voice
).
12.
Press the SET piston to save the change.
13.
Select another MIDI stops to be programmed, if required.
14.
Press the MENU piston to return to the main menu.
15.
Press the MENU piston again to exit the Easy Menu.