Easy Menu
Easy Menu - 6 -
the
JOHANNUS
revolution
7.
Press the SET piston for confirmation.
8.
Press the MENU piston to return to the main menu.
9.
Press the MENU piston again to exit the Easy Menu.
Reverb
Settings
1.
Use the ROM, SYM, BAR, HIS (styles), SOLO and TRIO (intonation) pistons to activate
the style and intonation the acoustics of which must be changed.
2.
Press the MENU piston.
3.
Use the - and + pistons to select the
Reverb Settings
mode on the display.
4.
Press the SET piston. A list of churches will appear with the corresponding reverberation
lengths.
5.
Use the - and + pistons to select the desired reverberation.
6.
Press the SET piston. The selected reverberation for the selected intonation has now
been saved in the memory and you will automatically return to the main menu.
7.
Press the MENU piston to exit the Easy Menu.
Startup
Settings
Using the Startup Settings mode, you can save your preferred settings. These settings will be
loaded when you start up the organ.
1. Press the MENU piston.
2. Use the - and + pistons to select the Startup Settings mode on the display.
3.
Press the SET piston. The display shows the menu for the Reset Procedures.
4. Use the - and + pistons to select the desired option.
Chorus On/Off
: Switch Chorus on or off.
◘
Select On or Off and press the SET piston.
Default Intonation.
Select one of the main intonations.
◘
Choose the desired intonation and press the SET piston.
Special Stops Mode:
Switch the harp, piano and harpsichord mode on or off.
◘
Select Enable or Disable and press the SET piston.
◘
If you choose Disable, you will return to the Startup Settings menu.
◘
If you choose Enable, you will be shown 3 choices with which to set the Special
Stops Mode as desired.
Reverb Program;
Choose the desired church and press the SET piston.
Reverb Length;
Use the – and + pistons to select the desired length and
press the SET piston.
Reverb Volume;
Use the – and + pistons to select the desired volume
and press the SET piston.
3D surround;
Use the – and + pistons to select On or Off and press the
SET piston.
◘
Press the MENU piston 2 times to return to the Startup Settings menu.
5. Press the MENU piston to return to the Easy menu.
Temperaments
The Temperaments mode sets the temperament.
Programming
Temperaments
1.
Press the MENU piston.
2.
Use the - and + pistons to select the
Temperaments
function on the display.
3.
Press the SET piston. The display shows the current temperament.
4.
Use the - and + pistons to select the desired temperament.
You can choose from twelve temperaments:
Equal
: (normal or equal temperament)
Young II