7
2.2
Placing the music desk
Before placing the music desk, check that the electrical cord of the lamp is
connected to the music desk. If not, contact your dealer.
There are two ways to place the music desk on the organ, depending on the
model organ that you have.
Placing the music desk with a Rembrandt 377
1. Unfold the fastening rods at the rear of the music desk.
2. Slide the fastening rods into the appropriate openings on top of the
organ.
3. Connect the electrical cord to the socket.
The height of the music desk can be set as follows:
1. Squeeze the handles at the rear of the music desk and, at the same time,
slide the music desk to the desired height.
2. Release the handles to fix the height of the music desk.
Placing the music desk with a Rembrandt 397 or 497
1. Place the music desk in the appropriate slots. These slots are in the
outside of the cabinets with drawstops.
2. Connect the electrical cord to the socket.
2.3
Switching on
Switch on the organ with the on/off piston at the right, next to the manuals.
Wait several seconds. Starting the control functions and the settings takes a
little time.
The lamps of the on/off and 0 pistons light and the settings appear on the
display.
Switch on the light of the music desk with the on/off switch at the rear of the
music desk.
Do not connect the electrical cord yourself. You can get injured and
cause damage to the organ.
Fold the music desk forward to close the rolltop cover.
