22
4.11.8
Reset Procedures
The Reset Procedures function is used to delete the capture memory, or to
reset a number of settings to the factory settings.
1. Push the MENU piston in.
2. Use the - and + pistons to select the
Reset Procedures
function on
the display.
3. Push the SET piston in. The display shows the menu for the Reset
Procedures.
4. Use the - and + pistons to select the desired procedure.
5. Push the SET piston in. The display requests confirmation.
6. Use the - and + pistons for
No
or
Yes
.
7. Push the SET piston in for confirmation.
8. Press the MENU piston in to return to the main menu.
9. Press the MENU piston in again to exit the Easy Menu.
4.11.9
Data Dump Mode
The Data Dump Mode function sends settings from the organ to a storage
medium (for example a sequencer) through the MIDI SEQ. output. See §
3.7.
1. Push the MENU piston in.
2. Use the - and + pistons to select the
Data Dump Mode
function on the
display.
3. Push the SET piston in. The
Press Set piston
text appears on the
display.
4. Make sure the desired storage medium is properly connected.
5. Push the SET piston in again. When data is being sent,
Sending data
appears on the display.
6. Press the MENU piston in to return to the main menu.
7. Press the MENU piston in again to exit the Easy Menu.
Memory
: Clear the entire capture memory.
MIDI
: Resets the factory settings of the MIDI stops.
Preset
: Resets the factory settings of the fixed combinations.
Crescendo
(option): Resets the factory settings of the General
Crescendo.
Do not use the organ when the text
Sending Data
is on the
display.
Summary of Contents for SWEELINCK 17
Page 1: ...USER MANUAL JOHANNUS SWEELINCK 17 27 AND 37 AGO...
Page 32: ...32...
