background image

 

 

25

 

 

Preset default

: Resets the factory settings of the fixed 

combinations.

 

 

Crescendo default

: Resets the factory settings of the General 

Crescendo pedal.

 

 

Reverb Program

: Resets the factory settings of the acoustics.

 

 

5.  Press the SET button. The display shows a prompt for confirmation.

 

6.  Use the - and + buttons to select 

Yes 

or 

No

7.  Press the SET button to confirm. 
8.  Press the MENU button to return to the main menu. 
9.  Press the MENU button again to exit the Easy Menu. 

4.15.8 Datadump 

 

The Datadump Mode sends settings from the organ to a storage medium 
(for example a sequencer) through the MIDI SEQ. output. 

 

See §3.4. 
1.  Press the MENU button. 
2.  Use the - and + buttons to select the 

Datadump

 on the display. 

3.  Press the SET button. The text 

Press Set

 

piston

 appears on the 

display.

 

4.  Make sure the required storage medium has been properly connected. 
5.  Press the SET button again. The display shows 

Sending data w

hile 

data is being sent.

 

 

Do not use the organ while the display shows the text 

Sending 

Data

 

6.  Press the MENU button to return to the main menu. 
7.  Press the MENU button again to exit the Easy Menu. 

4.15.9 Demo 

Songs 

 

The Demo Songs mode plays thirteen different demo songs. 
1.  Press the MENU button. 
2.  Use the - and + buttons to select the 

Demo Songs

 mode. 

3.  Press the SET button. The title and composer of the first demo song 

appear on the display.

 

4.  Use the - and + buttons to select one of the thirteen demo songs. 
5.  Press the SET button to select a demo song. 
6.  Use the - and + buttons to choose whether to play the selected demo 

song (

play one

) or all demo songs (

play all

). 

7.  Press the SET button to start playing the selected demo song(s). 

a.  Press the 0 button to stop playing the demo song. 
b.  With the Organ volume control you can adjust the volume before 

or while playing the demo song. 

c.  Use the Acoustics volume control to adjust the acoustics volume 

before or while playing the demo song. 

8.  Press the MENU button after having played the demo song(s). You will 

automatically return to the main menu.

 

9.  Press the MENU button again to exit the Easy Menu. 

 
 
 
 
 
 

Summary of Contents for Symphonica 35



































Reviews: