148
“
FULL DIAGNOSTIC
”
6-85
6-83
6-84
3a
3b
2
2
6-85b
Fig. 6-83/6-84
To turn the wheel in relation to the horizontal
position:
—
Press the Menu key
2
on the right part to view
the internal sidewall of the wheel (
Fig. 6-83
).
—
Press the Menu key
2
on the left part to view the
external sidewall of the wheel (
Fig. 6-84
).
6.5.4.3
Lens and Zoom
In the “FULL DIAGNOSTIC” screens you can
Magnify and Zoom, as follows:
In the “3D PLOT” screen you can activate the Zoom,
to zoom in or out of the image.
—
Press the Menu key
3b
, to zoom in the image
(
Fig. 6-85
).
Note
:
The zoom is useful for anomalies limited to a
small area, as shown in the example.
—
Press the Menu key
3a
, to zoom out the image.
Each time the key is pressed increases, positively or
negatively, the level of Zoom.
Note
:
After having activated the zoom, the wheel can still
be rotated manually and turned to the right and left
with the function key
2
, like in the basic view, with
no Zoom applied (
Fig. 6-84
).
Alternatively to this;
Use the touch screen controls.
—
Spread two fingers apart on the screen to zoom in,
and pinch to zoom out (
Fig. 6-85b
).
..
_
..........
