John Bean EHP System I, Operation Instructions Manual

 - Page 5 -

EHP Series Operation Instructions

SAFETY INFORMATION

For your safety, read this manual thoroughly

before operating the EHP Series Tire Changer

The EHP Series Tire Changers  are intended for use by properly trained automotive
technicians.  The safety messages presented in this section and throughout the manual
are reminders to the operator to exercise extreme care when changing tires with these
products.

There are many variations in procedures, techniques, tools, and parts for changing
tires, as well as the skill of the individual doing the work.  Because of the vast number of
wheel and tire applications and potential uses of the product, the manufacturer cannot
possibly anticipate or provide advice or safety messages to cover every situation.  It is
the automotive technician's responsibility to be knowledgeable of the wheels and tires
being changed.  It is essential to use proper service methods and change tires in an
appropriate and acceptable manner that does not endanger your safety, the safety of
others in the work area or the equipment or vehicle being serviced.

It is assumed that, prior to using the EHP Series Tire Changers, the

 operator has a

thorough understanding of the wheels and tires being changed.  In addition, it is as-
sumed he has a thorough knowledge of the operation and safety features of the rack,
lift, or floor jack being utilized, and has the proper hand and power tools necessary to
service the vehicle in a safe manner.

Before using the EHP Series Tire Changers, always refer to and follow the safety mes-
sages and service procedures provided by the manufacturers of the equipment being
used and the vehicle being serviced.

   IMPORTANT !!   SAVE THESE INSTRUCTIONS -- DO NOT DISCARD !!

For Reference Only

For Current Info See Equiserv.com