John Bean VPI SYSTEM II, Operation Instructions Manual

For your safety, read this manual thoroughly

before operating the JBC VPI System II Wheel Balancer

The JBC Model VPI System II Wheel Balancer

is intended for use by properly trained

automotive technicians.  The safety messages presented in this section and through-
out the manual are reminders to the operator to exercise extreme caution when servic-
ing tires with these products.

There are many variations in procedures, techniques, tools, and parts for balancing
tires, as well as the skill of the individual doing the work.  Because of the vast number of
wheel and tire applications and potential uses of the product, the manufacturer cannot
possibly anticipate or provide advice or safety messages to cover every situation.  It is
the automotive technician's responsibility to be knowledgeable of the wheels and tires
being serviced.  It is essential to use proper service methods in an appropriate and
acceptable manner that does not endanger your safety, the safety of others in the work
area or the equipment or vehicle being serviced.

It is assumed that, prior to using the Model VPI System II Wheel Balancer, the

operator

has a thorough understanding of the wheels and tires being serviced.  In addition, it is
assumed he has a thorough knowledge of the operation and safety features of the rack,
lift, or floor jack being utilized, and has the proper hand and power tools necessary to
service the vehicle in a safe manner.

Before using the Model VPI System II Wheel Balancer, always refer to and follow the
safety messages and service procedures provided by the manufacturers of the equip-
ment being used and the vehicle being serviced.

   IMPORTANT !!   SAVE THESE INSTRUCTIONS -- DO NOT DISCARD !!

SAFETY INFORMATION