John Bean VPI System, Operation Instructions Manual

SAFETY INFORMATION

For your safety, read this manual thoroughly

before operating the JBC VPI System I  Wheel Balancer

The JBC VPI System I Wheel Balancer is intended for use by properly trained automo-
tive technicians.  The safety messages presented in this section and throughout the
manual are reminders to the operator to exercise extreme caution when servicing tires
with these products.

There are many variations in procedures, techniques, tools, and parts for balancing
tires, as well as the skill of the individual doing the work.  Because of the vast number
of wheel and tire applications and potential uses of the product, the manufacturer can-
not possibly anticipate or provide advice or safety messages to cover every situation.
It is the automotive technician's responsibility to be knowledgeable of the wheels and
tires being serviced.  It is essential to use proper service methods in an appropriate and
acceptable manner that does not endanger your safety, the safety of others in the work
area or the equipment or vehicle being serviced.

It is assumed that, prior to using the Model VPI System I  Wheel Balancer, the

 operator

has a thorough understanding of the wheels and tires being serviced.  In addition, it is
assumed he has a thorough knowledge of the operation and safety features of the
rack, lift, or floor jack being utilized, and has the proper hand and power tools neces-
sary to service the vehicle in a safe manner.

Before using the Model VPI System I  Wheel Balancer, always refer to and follow the
safety messages and service procedures provided by the manufacturers of the equip-
ment being used and the vehicle being serviced.

   IMPORTANT !!   SAVE THESE INSTRUCTIONS -- DO NOT DISCARD !!