Cruisecontrol GC55 Installation manual
5
2
Safety directions
To ensure safety the GC55 complies with the following labels.
For the GC55 the following safety instructions apply, also printed in the item it concerns:
Only use the GC55 for the purpose as described in this installation manual.
The installer of the GC55 should have technical knowledge of modern cars
and be experienced in working on them.
Incorrect and/or ignorant installation, connection, adjustments and/or
diagnostics can lead to vehicle and/or GC55 malfunctions
and indirectly affect road safety.
Never alter or manipulate a GC55. Alterations or technical manipulations
made to the GoldCruise products can affect its safety adversely.
Inform the customer whenever no clutch protection is installed.
Point out that the GC55 will not disengage when depressing the clutch
pedal. John Gold advises always to install a clutch protection (if applicable).
Connect the twin cable with brown and brown/white wires in such a way
that, with the brake pedal released, one wire has +12V from the brake light
fuse and the other has ground through the brake lights.
Always check for a smooth operation of the throttle valve, throttle cable
and servo cable by operating the throttle by hand and by foot.
Make sure that they cannot jam in any way..
The servo cable has to point straight from the adjuster and pull in a straight
line.
Some cars hardly decelerate when the throttle valve remains slightly open.
Always allow for some free play in throttle released position.
Always solder the connections and insulate them with vulcanizing tape.
