Installation Procedure
DO’s
1. Do mount the time clock at eye level.
2. Do read the instructions fully so that you can get the best
from our product.
DON’Ts
1. Do not push hard on the LCD otherwise you will damage the
liquid crystal display and this is not repairable.
Installation
The time clock is designed to be flush mount back box of 35mm
should have been sunk in the wall prior to installation.
Step 1
Carefully separate the front half of the thermostat from the back
plate by placing a small flat head terminal driver into the slots
on the bottom face of the thermostat.
Step 2
Place the front of the time clock somewhere safe. Terminate the
time clock as shown in the diagrams at the back of this booklet.
Step 3
Clip the front of the time clock on to the back plate.
2
