![background image](http://html1.mh-extra.com/html/john-guest/jgstat2b/jgstat2b_quick-setup-manual_2021651008.webp)
09
speedfitUFH.co.uk
Customising from default configurations
1
2
3
4
If any other configuration is needed then the thermostat must first be put into set up
mode. In order to do this follow the instructions below.
Press and hold bottom 3 buttons until the
above screen is shown.
will appear on the screen.
Press
CONFIRM
The screen will reboot as in steps 1 to 3 on page
7. The screen will stop at (settings 1).
You are now ready to configure the thermostat to
your preferred configuration.
Using
scroll through the numbers to .
Press
CONFIRM
Summary of Contents for jgstat2b
Page 1: ...Quick Set up Guide ...