Assembly
Refer to assembly drawing opposite. Carefully unpack the carton, making sure all the parts are
present before assembly.
Thank you for purchasing this Charter Table light. Please read the instructions carefully before use
to ensure safe and satisfactory operation of this product.
Care instructions
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage
the finish.
Warnings!
This is a Class I1 product and must NOT be earthed.
Please read these instructions carefully before commencing any work.
If the flexible external cable becomes damaged, it should only be replaced by the manufacturer or
suitably qualified person.
For your safety, always switch off the supply before cleaning or adjusting.
If you are in any doubt, please consult a qualified electrician.
Parts list
Image
Qty
Lamp base
1
Light fitting
1
Bulb fitting
tool
1
Light bulb
1
Parts list
Figure 1
Step 3
Plug into the mains and switch on by pressing the inline switch. Your table lamp is now ready for
use. The angle of the shade can be adjusted using the handle at the back of the shade (E). Always
keep one hand on the base when adjusting the shade position.
Figure 2
Step 2
Fit the recommended bulb (C), using the bulb fitting tool (D), as
per the details overleaf. Keep the supplied bulb fitting tool for
future use.
Step 1
To reduce packaging, this product is shipped disassembled. Screw
the stem (B) onto the threaded body on the base (A) to secure
in place.
