John Lewis HERRINGBONE IP44 WALL LIGHT, User Manual

01

Description

Image

Quantity 

Parts list

Introduction

Thank you for purchasing this Herringbone 
IP44 wall light. Please read the instructions 
carefully before use to ensure safe and 
satisfactory operation of this product. 

Warnings

We recommend a qualified electrician carries out any electrical wiring 

outdoor

.

For your safety, this product must be installed in accordance with local Building 
Regulations.
If in any doubt, or where required by the law, consult a competent person who is 
registered with an electrical self-certification scheme. Further information is available 
online or phone your Local Authority.
To prevent electric shock, switch off the mains supply before installing or maintaining 
this product. Ensure other persons cannot restore the electricity supply without your 
knowledge. 
Always use the correct bulb type with the correct wattage as indicated in the 
specification table. This product is Class I =

      and should be fitted to a lighting 

supply (with earth) protected by a 5 amp fuse or equivalent circuit breaker. 
When changing the bulb, always switch off at the mains and allow the old bulb to 
cool down before handling. Dispose of used bulbs carefully.
Caution! The bulb and surrounding parts can become hot during use.

If the inner glass on this product is broken, it must be replaced

A

C

D

Wall Light

Inner glass shade

Fixing bracket

Fixing screw pack

1 

1 

2

1 

B

2

1 

E

F

Outer shade 

Shade cover