background image

Repairs - after sales service

Your original receipt acts as your guarantee and

confirms your guarantee period. Please make

sure you retain it. The guarantee does not cover

you against faults caused by accidental damage

or misuse. For further details visit

johnlewis.com/customer-services. If it is not

working correctly refer to the "Troubleshooting"

chapter in this user manual. If a fault occurs

which you can not resolve through following the

advice and information contained within this

instruction manual, the next step is to contact

John Lewis technical support on:

0330 1230106

They will give you details for your local service

engineer. Before calling out an engineer, please

ensure you have read the details under the

heading “Troubleshooting”.
When you contact your local service engineer

you will need to give the following details:

1. Your name, address and post code

2. Your telephone number

3. Clear and concise details of fault

4. The purchase date as found on your receipt

5. The model and serial number of the appliance.

So that you always have these numbers at

hand, we recommend you to make a note of

them here:

• Mod.......................................

• P.N.C.....................................

• S.N.........................................

IMPORTANT: If you call out an engineer

to a fault listed under the heading

''Troubleshooting'', or to repair a fault

caused by incorrect use or installation, a

charge will be made even if the appliance

is under guarantee.
Spare parts
Always insist on genuine spare parts.

An authorised service engineer should service

this product, and only genuine spare parts

should be used. Under no circumstances should

you attempt to repair the appliance yourself.

Repairs carried out by inexperienced persons

may cause injury or serious malfunctioning.

Please contact John Lewis technical support on

0330 1230106 for assistance.

Shopping is easy with John Lewis Shops

John Lewis, Aberdeen 01224 625 000
John Lewis, Basingstoke 01256 406200
John Lewis, Bluewater 01322 624 123
John Lewis, Brent Cross 020 8202 6535
John Lewis, Birmingham 0345 604 9049
John Lewis, Cambridge 01223 361 292
John Lewis, Cardiff 02920 536 000
John Lewis, Cheadle 0161 491 4914
John Lewis, Chelmsford 0124 545 8400
John Lewis, Cribbs Causeway 0117 959 1100
John Lewis, Edinburgh 0131 556 9121
John Lewis, Exeter 01392 284150
John Lewis, Glasgow 0141 353 6677
John Lewis, High Wycombe 01494 462 666
John Lewis, Kingston 020 8547 3000
John Lewis, Leicester 0116 242 5777
John Lewis, Leeds 0113 3946299
John Lewis, Liverpool 0151 709 7070
John Lewis, Milton Keynes 01908 679 171
John Lewis, Newcastle upon Tyne 0191 232 5000
John Lewis, Norwich 01603 660 021
John Lewis, Nottingham 0115 941 8282
John Lewis, Oxford Street 020 7629 7711
John Lewis, Peterborough 01733 344 644
John Lewis, Reading 0118 957 5955
John Lewis, Sheffield 0114 276 8511
Peter Jones, Sloane Square 020 7730 3434
John Lewis, Solihull 0121 704 1121
John Lewis, Southampton 02380 216 400
Knight & Lee, Southsea 02392 827 511

Hob User Manual

26

Summary of Contents for JLBIIH805

































Reviews: