John Lewis JLBIIH805, User Manual

Safety instructions

Installation

Warning! Only a qualified

person must install this

appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Follow the installation instruction supplied with

the appliance.

• Keep the minimum distance from the other

appliances and units.

• Always take care when moving the appliance as

it is heavy. Always use safety gloves and

enclosed footwear.

• Seal the cut surfaces with a sealant to prevent

moisture to cause swelling.

• Protect the bottom of the appliance from steam

and moisture.

• Do not install the appliance adjacent to a door

or under a window. This prevents hot

cookware to fall from the appliance when the

door or the window is opened.

• If the appliance is installed above drawers make

sure that the space, between the bottom of the

appliance and the upper drawer, is sufficient for

air circulation.

• The bottom of the appliance can get hot. Make

sure to install a non-combustible separation

panel under the appliance to prevent access to

the bottom.

• Make sure that the ventilation space of 2 mm,

between the worktop and the front of the

below unit, is free. The warranty does not

cover damages caused by the lack of an

adequate ventilation space.

Electrical Connection

Warning! Risk of fire and

electrical shock.

• All electrical connections should be made by a

qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation make sure

that the appliance is disconnected from the

power supply.

• Make sure that the electrical information on the

rating plate agrees with the power supply. If

not, contact an electrician.

• Make sure the appliance is installed correctly.

Loose and incorrect electricity mains cable or

plug (if applicable) can make the terminal

become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable tangle.

• Make sure that a shock protection is installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if applicable)

does not touch the hot appliance or hot

cookware, when you connect the appliance to

the near sockets

• Do not use multi-plug adapters and extension

cables.

• Make sure not to cause damage to the mains

plug (if applicable) or to the mains cable.

Contact our Authorised Service Centre or an

electrician to change a damaged mains cable.

• The shock protection of live and insulated parts

must be fastened in such a way that it cannot be

removed without tools.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure

that there is access to the mains plug after the

installation.

• If the mains socket is loose, do not connect the

mains plug.

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type fuses

removed from the holder), earth leakage trips

and contactors.

Hob User Manual

5