background image

• The electrical installation must have an isolation

device which lets you disconnect the appliance

from the mains at all poles. The isolation device

must have a contact opening width of minimum

3 mm.

Use

Warning! Risk of injury, burns

and electrical shock.

• Remove all the packaging, labelling and

protective film (if applicable) before first use.

• Use this appliance in a household environment.

• Do not change the specification of this

appliance.

• Make sure that the ventilation openings are not

blocked.

• Do not let the appliance stay unattended during

operation.

• Set the cooking zone to “off” after each use.

• Do not rely on the pan detector.

• Do not put cutlery or saucepan lids on the

cooking zones. They can become hot.

• Do not operate the appliance with wet hands

or when it has contact with water.

• Do not use the appliance as a work surface or

as a storage surface.

• If the surface of the appliance is cracked,

disconnect immediately the appliance from the

power supply. This to prevent an electrical

shock.

• Users with a pacemaker must keep a distance

of minimum 30 cm from the induction cooking

zones when the appliance is in operation.

• When you place food into hot oil, it may splash.

Warning! Risk of fire and

explosion

• Fats and oil when heated can release flammable

vapours. Keep flames or heated objects away

from fats and oils when you cook with them.

• The vapours that very hot oil releases can cause

spontaneous combustion.

• Used oil, that can contain food remnants, can

cause fire at a lower temperature than oil used

for the first time.

• Do not put flammable products or items that

are wet with flammable products in, near or on

the appliance.

Warning! Risk of damage to

the appliance.

• Do not keep hot cookware on the control

panel.

• Do not put a hot pan cover on the glass surface

of the hob.

• Do not let cookware to boil dry.

• Be careful not to let objects or cookware fall on

the appliance. The surface can be damaged.

• Do not activate the cooking zones with empty

cookware or without cookware.

• Do not put aluminium foil on the appliance.

• Cookware made of cast iron, aluminium or with

a damaged bottom can cause scratches on the

glass / glass ceramic. Always lift these objects

up when you have to move them on the

cooking surface.

• This appliance is for cooking purposes only. It

must not be used for other purposes, for

example room heating.

Care and cleaning

• Clean regularly the appliance to prevent the

deterioration of the surface material.

• Deactivate the appliance and let it cool down

before you clean it.

• Disconnect the appliance from the electrical

supply before maintenance.

• Do not use water spray and steam to clean the

appliance.

• Clean the appliance with a moist soft cloth.

Only use neutral detergents. Do not use any

abrasive products, abrasive cleaning pads,

solvents or metal objects.

Disposal

Warning! Risk of injury or

suffocation.

• Contact your municipal authority for

information on how to discard the appliance

correctly.

Hob User Manual

6

Summary of Contents for JLBIIH805

































Reviews: