Before first use
1.
Make sure that the current level of the
water softener agrees with the hardness
of the water supply. If not, adjust the
level of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any processing
residuals that can still be inside the appliance.
Do not use detergent and do not load the
baskets.
When you start a programme, the appliance can
take up to 5 minutes to recharge the resin in the
water softener. It seems that the appliance is not
working. The washing phase starts only after this
procedure is completed. The procedure will be
repeated periodically.
The salt container
Caution! Only use salt
specifically designed for
dishwashers.
The salt is used to recharge the resin in the
water softener and to assure good washing
results in the daily use.
How to fill the salt container
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt container (Only
for the first time).
3. Fill the salt container with dishwasher salt.
4. Remove the salt around the opening of the salt
container.
5. Turn the cap of the salt container clockwise to
close the salt container.
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it,
after you fill the salt container, start
a programme.
Dishwasher User Manual
15
