Cooker hood user guide
8
Care, cleaning and servicing
Note:
Switch off and unplug the cooker hood before carrying
out any cleaning or maintenance work.
Care and cleaning
Clean the interior and exterior casing using a cloth with water
and mild (neutral) detergent.
Do not use abrasive cleaning materials or scouring pads when
cleaning the cooker hood as this may damage the stainless
steel
fi
nish.
Cleaning and replacing
fi
lters
This cooker hood is supplied with aluminium
fi
lters.
Aluminium
fi
lters
Aluminium
fi
lters are designed to absorb grease and dust
during cooking. They should be removed and cleaned at least
once every two months, or more often if you regularly fry
food.
To clean the aluminium
fi
lters:
1 Open the slide.
2 Pull the handle to unlock the
fi
lter and remove the
fi
lter
from the cooker hood.
3 Wash
the
fi
lter in warm, soapy water or in a dishwasher
and dry it.
4 Replace
the
fi
lter in the cooker hood and press into
position.
5 Close the slide.
The
fi
lters may discolour after a few washes. This is normal
and does not mean they have to be replaced.
Charcoal
fi
lters
Charcoal
fi
lters are designed to absorb grease, dust and
unwanted odours during cooking. They are only required
when the cooker hood is used for recirculating (i.e. when it is
not ducted out). They cannot be washed or re-used and they
must be replaced at least every four months.
To
fi
t this
fi
lter:
1 Remove the anti-grease
fi
lter.
2 Insert the circular
fi
lter into the centre of the fan grille and
turn it 90
°
until it is locked in position.
Replacement
fi
lters can be obtained from www.johnlewis.com.
