27
26
As well as a clock and calendar, Tenor also features two versatile wake-
up alarms with snooze facility and a sleep function to turn the system
off after a set period.
Use the NAVIGATION dial to increase/decrease the time and SELECT
to move to the next option.
When using the remote control, use the NAVIGATION buttons to
increase/decrease the time and the SELECT button to move to the
next option.
Each alarm can be set to start in a particular mode.
To set or change an alarm, select
Menu > Main Menu > Alarms.
The alarm setup will then prompt you to set the alarm parameters.
- Enable – Off | Daily | Once | Weekends | Weekdays.
- Time – Set the desired alarm time.
- Mode – Buzzer | Internet radio | CD | DAB | FM.
- Preset – Play previously saved preset as the alarm sound.
- Volume – Set alarm volume from 0-32 Save.
- To activate the new settings, scroll down and select Save. The
screen shows active alarms with an icon at the bottom left.
- At the set time, the alarm will sound. To temporarily silence it,
press the SELECT button to snooze
You can change the snooze period with the NAVIGATION dial. The
radio returns to standby for the set period with the silenced alarm icon
flashing.
To set the sleep timer, select
Menu > Main menu > Sleep.
Then choose from Sleep OFF | 15 MINS | 30 MINS | 45 MINS | 60 MINS.
Once you select a sleep period, the system returns to the main menu.
The sleep function can also be programmed using the remote control
The system settings menu :
- Equaliser
- Network
- Time / Date
- Backlight
- Language
- Factory reset
- Software update
- Setup wizard
- Info
- Privacy policy
This presents a number of preset settings, plus a My Equaliser (My EQ)
option to allow you to create your own personal settings.
- To choose an EQ setting, select
Menu > System settings > Equaliser.
You can then choose from a variety of preset modes, such as
Normal, Flat. Jazz, Rock or Movie, and My EQ.
The last option ‘My EQ profile setup’ allows you to define your own
settings for the ‘My EQ’ option with custom bass and treble settings,
and loudness on/off.
Tenor remembers the last four wireless networks it connected to, and
automatically tries to connect to whichever one of them it can find. You
can see the list of registered networks through
Menu > System settings > Network > Network profile >
From here, you can delete unwanted networks by turning and pressing
select, then confirming delete > Yes.
There are also other options for viewing and manually altering network
settings from
Menu > System settings > Network >
(for example setting up a wired network).
Users experienced with networking may find these options useful for
diagnosing and fixing network problems.
The time and date can be updated manually or automatically. With
auto-update, the time and date are automatically synchronised with
national time signals broadcast over DAB and FM (when available).
You can also select the display format for the time and date.
The time menu contains the following options:
- Set Time/Date
- Auto update
Alarms and sleep
Alarms
Sleep
System settings
Equaliser
Network
Time/Date
