ITEM NO.: OT-12
REVISED JUN 19, 2019
Printed in Vietnam
- 7 -
STEP 5
Attach drawer sides (G) to drawer front (F) with screws (4) as shown below. Tighten with a screwdriver.
Insert drawer bottom (I) into the grooves at bottom of drawer sides (G) and drawer front (F) as shown below.
Attach drawer back (H) to drawer sides (G) with screws (4) as shown below. Tighten with a screwdriver.
Attach knob (9) to front of drawer with pan head screw (8) as shown below. Tighten with a screwdriver.
Carefully put the drawer into the unit.
STEP 6
Attach knob (9) to front of door with pan head screw (8) as shown below. Tighten with a screwdriver.
Attach steel bands (7) to the unit with screws (6) as shown below.
(to secure the product to the wall and reduce the risk of tipping over).
Important!
Properly attach steel bands (7) to the wall in an area of
drywall or plaster with a wood stud:
Mark the attachment point(s) with a pencil at the appropriate height
positioned over the wood stud(s)
in the wall
.
Drill 1/8-inch (3mm) diameter hole(s) into the wood stud(s) located in the wall, where you marked
with the pencil.
Properly attach steel bands to the wall with screws (4) and tighten screw(s) firmly into the wall.
