Johnny Vac V1 (14-10)
15
Overload Reset Switch
Overload reset switch provides emergency protection for the device, disconnecting power supply in case
of overloaded circuits.
Backup Light
Drain and Clean Recovery Tank
When cleaning is finished or when the recovery tank full indicator shuts off the power supply of vacuum
motor, the recovery tank should be drained and cleaned. Then refill solution tank and restart working.
1. Drive the machine to a solution disposal drain.
2. Turn the ON/OFF key switch off.
FOR SAFETY
: Stop the machine on a level surface and turn it off before leaving or servicing.
3. Remove the recovery tank drain hose. Remove the plug while holding the hose up. Lower the drain
hose slowly to the flow drain or sink.
4. Lift recovery tank cover; flush the tank inside with clean water.
Do not use flammable materials in the tank in case of explosion or fire. Do not clean the tanks
with steam as excessive heat can damage tanks and components.
Overload reset switch
Backup light