1. Stop the machine on a level surface, turn off all the power switches and remove the key.
2. Pull the squeegee lifting rod upwards (Figure 3).
3. Fix the squeegee assembly to squeegee installation bracket following the diagram
below (Figure 4). Place the fastening knob into the socket completely before tightening.
4. Connect vacuum hose to the squeegee assembly as is shown below (Figure 5).
5. Check squeegee blade and make proper adjustment if necessary (please refer to
"Squeegee Blade Adjustment" in page 30).
- 13 -
User Guide
JVC85BCT
M A C H I N E I N S TA L L AT I O N
Figure 3
Figure 4
Figure 5
