INSTALL BRUSH / PADS
F
OR SAFETY: Stop the machine on a level surface, turn off all the power switches and remove the key
before installing the brushes or pad holder.
1. Stop the machine on a level surface, turn off all the power switches and remove the key.
2. Push the lifting pedal down while moving it rightwards (as indicated by the arrow) to lift the
brush motor (Figure 6).
3. Place the pad on the pad holder before fixing the pad holder. Center the pad holder/ brush on
brush buckles; turn it clockwise to load it. Conversely, unload the pad holder/brush (as indicated by
the arrow). The smaller is ---------- pad holder/brush, correspondingly, the bigger is ---------- pad
holder/brush (Figure 7)
- 14 -
User Guide
JVC85BCT
M A C H I N E I N S TA L L AT I O N
Figure 6
Figure 7
