- 33 -
User Guide
JVC85BCT
PUSH, TOW AND TRANSPORT THE MACHINE
Be certain to follow the procedures below when transporting the machine by the trailer or truck:
1. Lift the squeegee and brush head.
2. Load/unload the machine using recommended cargo handling apron.
3. Fix the front of the machine close to the front position of the truck or trailer. Lower the brush head
and squeegee after the machine is fixed tight.
4. Place a block behind each driving wheel to avoid machine sliding.
5. Fasten the rack of the machine with ropes to avoid inclination. A bracket must be installed on the
floor of the truck or trailer (Figure 48).
FOR SAFETY: Use the recommended cargo handling apron to load and unload the machine onto and
off the truck or trailer. Fasten the machine to the truck or trailer with ropes.
MACHINE STORAGE
1. Charge the batteries before storage. Do not store the machine with the battery exhausted. For
long-term storage, be sure the batteries are charged every 2-3 months to avoid battery damages
due to insufficient voltage.
2. Drain and clean the solution tank and recovery tank.
3. Store the machine at a dry area, keep the squeegee and brush lifted.
4. Open the recovery tank for ventilation.
ATTENTION: Keep the machine away from rain, store it indoor.
5. Follow the frost protection instructions below if the machine is stored at a freezing temperature
