DRCPX Remote Controller User Manual
6
The outdoor temperature display is not available for some models. In that case, the indoor
unit receives the signal, and the indoor set temperature is displayed.
o
The default is for the remote controller to display the set temperature when turning
on the unit. There is no display on the remote controller. Only remote controller
models with dual-8 display can display the set temperature when turning on the unit.
o
When displaying the indoor or outdoor ambient temperature, the indoor
temperature indicator displays the corresponding temperature. After three or five
seconds, the display automatically changes to the set temperature.
I FEEL button
Press this button to start I FEEL function, and is displayed on the remote controller.
After this function is set, the remote controller sends the detected ambient temperature to
the controller and the unit automatically adjusts the indoor temperature according to the
detected temperature. Press this button again to close I FEEL function and disappears.
Note:
Do not put the remote controller near an object of high or low temperature to avoid
detecting an inaccurate ambient temperature.
LIGHT button
Press this button to turn OFF the display light on the indoor unit.
icon on the remote
controller disappears. Press this button again to turn ON the display light.
icon is
displayed.
CLOCK button
•
Press this button to set the clock. The clock icon
on the remote controller will blink.
•
Press the UP or DOWN button within 5 s to set the clock. Each time you press the UP or
DOWN button, the time increases or decreases by 1 minute. If you hold the UP or DOWN
button for 2 s, the time will change quickly. Release the button when you reach the time
you want.
•
Press the CLOCK button to confirm the time. The clock icon
on the remote controller
stops blinking.
Note:
o
Clock time displays in 24-hour time.
o
The interval between two operations cannot exceed 5 s. Otherwise, the remote
controller will quit the setting mode.
o
Operation for TIMER ON/TIMER OFF button is the same.
TIMER ON and TIMER OFF buttons
TIMER ON button
